Thursday, March 5, 2015

NCK Dongle Main Module V16.3 Full Setup Download

NCK Dongle Main Module V16.3 Full Setup Download - The model we looked at was running the latest Android 8.1 Oreo software. It also uses Asus’ own ROG Gaming UI interface that looks very appropriate for the style of the phone.Overall, it appears to be fairly stock Android even though it looks quite different due to the elements like icon pack. There doesn’t seem to be much bloatware, although this can change by the time the device launches, especially via networks. come along with that too, well we have collected a lot of data from the field directly and from many other blogs so very complete his discussion here about NCK Dongle Main Module V16.3 Full Setup Download, on this blog we also have to provide the latest automotive information from all the brands associated with the automobile. ok please continue reading:

A lot of what drives development in the Lync Optimizer is my own personal needs. Every once in a while, I come across a deployment that has some requirement that the Optimizer doesn't cater to.  Most often, it's related to a country that isn't in the Optimizer, which is easy enough to remedy in most cases, with a lot of research and testing. Other times, its a quirk of the NCK Dongle Main Module V16.3 Full Setup Download deployment that forces me to change how the Optimizer script runs.

On my latest project, there are over 100 sites that have to have their own routes/PSTN usages for places around the globe. Normally, I generate all the dial rules, and run the resulting scripts, answering the questions as they come up (Site ID? Least cost routing? Location based routing? Would you like fries with that?).  Until this past week, I was happy to press 1, Yes, No, No, Supersize me etc.  Not anymore.

Many of the finest PowerShell scripts out there (I'm looking at you, Lync Scriptboy) allow you to enter parameters as required for execution.  I figured it was time to add that feature to the Lync Optimizer generated scripts.

So, if you don't want to answer questions as the Lync Optimizer script is running, you can enter answers to those questions as parameters in the command line prior to execution. All parameters are optional. If you don't add the parameter in the command line, the script will ask you during execution as it always has.

An interesting new feature I enabled along with the command line options is the ability to control which sites are included as part of the least-cost/failover routing logic. Previously, if you have lots of sites with Enterprise Voice routes/policies etc. and you choose to enable least-cost/failover routing in the script, your resulting voice policy PSTN usage list would be very long.  This option now allows you to limit which sites to apply least-cost/failover routing to.  Just use the option -LCRSites followed by the ruleset prefix of the sites to apply least-cost failover routing enclosed with quotes.  For example:  Scriptname.ps1 -LeastCostRouting:$TRUE -LCRSites "CA-ON-Toronto, UK-London, SG-Singapore"

If you need to run a bunch of Optimizer-generated scripts, this can be a real timesaver, especially when you have to run the same script multiple times to account for multiple gateways, or applying least-cost routing and that sort of thing.

The Optimizer script also now has the proper syntax for getting help, so you can type HELP and it will spit out all the available options.

The available options are:

SiteID
The numeric identifier associated with the Lync site to apply the script to. If a value is not provided, script will ask during execution. To see a list of sites and the associated site IDs, run Get-CSSite

DialPlanType
Create a site-level or user-level dialplan. Site-level applies to all users at a site, while user-level have to be explicitly applied. Possible values are 'Site' or 'User'. If a value is not provided, script will ask during execution.

LeastCostRouting
Either apply or don't apply least cost routing to the given site. Only applies if multiple Lync Optimizer generated rulesets are detected. If a value is not provided (and multiple rulesets are detected), script will ask during execution.

LCRSites
Apply least-cost/failover routing only to rulesets defined in this list. Separate site names with commas. Input site names exactly the same as the prefix for the desired site (ie CA-ON-Toronto, UK-London etc).

OverwriteSiteVoicePolicy
Overwrite any existing site-level voice policy if values are already there. Only applies if a site-level voice policy exists. If a value is not provided, script will ask during execution, if necessary.

LocationBasedRouting
Apply location-based routing to a selected site. Only applies if Lync network sites have been created. If a value is not provided, script will ask during execution, if it detects Lync network sites.

LBRNetworkSite
The name of the Lync network site to apply location-based routing. Only applies if Lync network sites exist. For a list of Lync network sites, run Get-CSNetworkSite. Works in conjunction with LocationBasedRouting parameter. If a value is not provided, script will ask during execution, if network sites exist, and the user selects location-based routing.

LocalOnly
Creates only local routes and PSTN usages for the selected site. Useful when using a central SIP trunk for all dialing but want to have local-only voice policies for remote sites without their own local PSTN access. Assumes that the users at the remote site are assigned numbers appropriate to their site, and the SIP provider enforces the appropriate local dialing area for those numbers.

MediationPool
The FQDN of a mediation pool to apply the script to. Only applies if multiple mediation pools exist within the selected Lync site. If a value is not provided and multiple mediation pools exist, script will ask during execution.

PSTNGateway
The FQDN of a PSTN gateway/trunk to apply the script to. Only applies if multiple PSTN gateways/trunks are assigned to the selected mediation pool. If a value is not provided and multiple PSTN gateways/trunks exist, script will ask during execution.

ApplicationPool
The FQDN of an application pool to apply the script to. Only applies if multiple application pools exist within the selected Lync site, and call park or premium call blocking is being used. If a value is not provided and multiple application pools exist, and either call park or premium call blocking is being used,  script will ask during execution.

Enter any desired options on the command line using the following syntax:

ScriptName.ps1 -SiteID digit -DialPlanType user/site -LeastCostRouting true/false -LCRSites "sitename1,sitename2,sitename3-OverwriteSiteVoicePolicy true/false -LocationBasedRouting true/false -LBRNetworkSite NetworkSiteName -MediationPool MedPoolFQDN -PSTNGateway PSTNGatewayFQDN -ApplicationServer AppServerFQDN

No comments:

Post a Comment